
Polybutylene Pipe in Tampa Homes: What to Know
Polybutylene was a plastic supply pipe widely installed in U.S. homes from about the late 1970s to the mid-1990s, including many in the Tampa Bay area. It became the subject of large class-action lawsuits over failures and is no longer used.
How to spot it
- Flexible gray (sometimes blue or black) pipe, often marked "PB2110"
- Look where pipes enter the water heater, under sinks, and near the main shutoff
- Copper stub-outs at fixtures don't rule it out; the pipe in the walls may still be polybutylene
Why it matters
Polybutylene can fail without warning, especially at fittings, and some insurers ask about it or won't write policies on homes that still have it. A licensed plumber can confirm what you have and quote a repipe.
If it fails
- Close the main shutoff.
- Photograph the failed section and keep it if you can.
- Get water removed and the house dried within 24 to 48 hours.
Want a local pro to take a look?
Request help onlineFree referral to an independent the Tampa Bay area business. Requests accepted 24/7.
Sources and local resources
Sources checked November 19, 2026. Local rules change; confirm details with the agency.